Waveshare NB-IoT/eMTC/EDGE/GPRS/GNSS HAT for Raspberry Pi, Based on SIM7000E(in Europe.)

NB-IoT/eMTC/EDGE/GPRS/GNSS HAT for Raspberry Pi, Based on SIM7000EOverviewThis Raspberry Pi HAT features multi communication functionalities: NB-IoT, eMTC, EDGE, GPRS, and GNSS.The NB-IoT (NarrowBand-Internet of Things) and eMTC (enhanced Machine Type Communication) are rising IoT communication technologies evolved from LTE (4G), with advantages include low power, low cost, wide coverage, etc. They are suited for applications such as intelligent instruments, remote controlling, asset tracking, remote monitoring, E-health, mobile POS terminals, sharing bikes, and so on. While the GSM/GPRS, and EDGE are traditional 2G/2.5G technologies capable of sending SMS or making other wireless communications.Therefore, the SIM7000E NB-IoT HAT would be an ideal choice for either evaluating new rising technologies, or simply communicating/positioning via multiple ways.Note: please pay attention that the NB-IoT and eMTC functions of this module are ONLY available in Europe.FeaturesRaspberry Pi connectivity, compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+Supports TCP, UDP, PPP, HTTP, FTP, MQTT, SMS, Mail, etc.Supports GNSS positioning (GPS,GLONASS,BeiDou and Galileo)Onboard USB interface, to test AT Commands, get GPS positioning data, and so onBreakout UART control pins, to connect with host boards like Arduino/STM32Onboard voltage translator, 3.3V by default, allows to be switched to 5V via 0¦¸ resistorSIM card slot, compatible with both normal SIM card and NB-IoT specific card2x LED indicators, easy to monitor the working statusBaudrate: 300bps~3686400bpsControl via AT commands (3GPP TS 27.007, 27.005, and SIMCOM enhanced AT Commands)Supports SIM application toolkit: SAT Class 3, GSM 11.14 Release 98, USATComes with development resources and manual (examples for Raspberry Pi/Arduino/STM32) GNSS SpecificationsReceiver type16-channelC/A code SensitivityTracking: -162 dBm (GPS)/-157 dBm (GLONASS)/TBD (BD)Cold starts: -148 dBm Time-To-First-FixCold starts: <35sHot starts: <1s AccuracyPosition: <2.5m CEP Other SpecificationsPower supply: 5VOperating voltage: 5V/3.3V (3.3V by default)Sleep Mode current: 1.2mA(@DRX=2.56s)Power Save Mode current: 9uAOperating temperature: -40¡ãC ~ 85¡ãCStorage temperature: -45¡ãC ~ 90¡ãCDimension: 30.2mm x 65mm