Waveshare CP2102(type A) USB to UART Board / TXD LED/RXD LED/POWER LED/SB to RS232 Development Board

US$ 5.77 US$ 8.97

Availability: In stock

SKU: 295547

Brand Waveshare Model CP2102(type A) Quantity 1 DX.PCM.Model.AttributeModel.Unit Form Color Green Material CCL + PCB board Chipset CP2102 English Manual / Spec Yes Download Link http://www.wvshare.com/downloads/accBoard/CP2102-USB-UART-Board.7z Other Features The CP2102...

Add to wishlist

Brand	Waveshare
Model	CP2102(type A)
Quantity	1 DX.PCM.Model.AttributeModel.Unit
Form Color	Green
Material	CCL + PCB board
Chipset	CP2102
English Manual / Spec	Yes
Download Link	http://www.wvshare.com/downloads/accBoard/CP2102-USB-UART-Board.7z
Other Features	The CP2102 USB UART Board (type A) is an accessory board that features the single-chip USB to UART bridge CP2102 onboard. CP2102 features: Single-Chip USB to UART Data Transfer No external resistors required, no external crystal required On-chip power-on reset circuit and voltage regulator Integrated 1024-Byte EEPROM USB Function Controller USB Specification 2.0 compliant; full-speed (12 Mbps) USB suspend states supported via SUSPEND pins UART All handshaking and modem interface signals Data formats supported: Data bits: 5, 6, 7, and 8 Stop bits: 1, 1.5, and 2 Parity: odd, even, no parity Baud rates: 300 bps to 1 Mbits 576 Byte receive buffer; 640 byte transmit buffer Hardware or X-On/X-Off handshaking supported Event character support Virtual COM Port Device Drivers Windows 8/7/Vista/Server 2003/XP/2000 MAC OS-X/OS-9 Linux 2.40 or higher USBXpress Direct Driver Support Windows 7/Vista/Server 2003/XP/2000 Windows CE Temperature Range - 40C to +85C Features Supports Windows 8 Voltage output support: 5V or 3.3V Integrated USB protection device: SP0503 3 LEDs: TXD LED, RXD LED, POWER LED Pins accessible on pinheaders: TXD, RXD, RTS, CTS Other pins are accessible on drilled holes, easily connected to user application system (separate pinheaders are provided) Example Applications Upgrade of RS-232 legacy devices to USB USB to RS-232 serial adapter How to Use In the case of working with a MCU: VCCIO: 3.3V or 5V output (the module is powered from USB, onboard jumper should be shorted to 3.3V or 5V) GND: connects to GND TXD: connects to MCU.RX (signal direction: MCU.RX << CP2102 << PC.TX) RXD: connects to MCU.TX (signal direction: MCU.TX >> CP2102 >> PC.RX) RTS: connects to MCU.CTS (signal direction: MCU.CTS << CP2102 << PC.RTS) CTS: connects to MCU.RTS (signal direction: MCU.RTS >> CP2102 >> PC.CTS) Note: VCP examples and USBXpress driver program library are provided.
Packing List	1 x CP2102 USB UART Board (type A) 1 x 40-pin male pinheader & 40-pin female pinheader