SUNHANS 2.4GHz 802.11n MIMO 2T2R 300M Wireless Indoor WiFi Signal Booster

SUNHANS 2.4GHz 802.11n MIMO 2T2R 300M Wireless Indoor WiFi Signal Booster

US$ 146.73 US$ 161.73

: In stock

: 20001964

Consumer Alert1. This booster is suitable for consumer use.2. Before use, you MUST register this device with your wireless provider and have your provider¡¯s consent. Most wireless providers consent to...
Consumer Alert
1. This booster is suitable for consumer use.
2. Before use, you MUST register this device with your wireless provider and have your provider¡¯s consent. Most wireless providers consent to the use of signal boosters. Although AT&T, Sprint, T-Mobile, Verizon and 90 additional carriers have already given consent for all consumers to use this device, you MUST still register. Some providers may not consent to the use of this device on their network. If you are unsure, contact your provider.
3. You MUST operate this device with approved antennas and cables as specified by the manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from any person.
4. You MUST cease operating this device immediately if requested by the FCC or a licensed wireless service provider.
5. You MUST shut down if causing interference.
6. WARNING. E911 location information may not be provided or may be inaccurate for calls served by using this device.


- Model: SUNHANS SHN-i1000-2-2
- Color: Black
- Aluminum alloy housing
- Working frequency: 2.4~2.5GHz
- Access method: CCK/DSS/TDD/OFDM
- Spurious emission: 30MHz ~ 1 GHz : -36dBm(max.) / 1GHz ~ 12.75 GHz : - 30dBm(max.)
- Tx output power variation:
- 25'C: 29dBm +/- 1dB(Pin=13dBm)
- 30'C: 28dBm +/- 2dB(Pin=13dBm)
- 70'C: 28dBm +/- 2dB(Pin=13dBm)
- Tx output power vs. Input Power
- 29dBm +/- 1dB(Pin=7~20dBm)
- 29dBm +/- 2dB(Pin=7~20dBm)
- 29dBm +/- 2dB(Pin=7~20dBm)
- Tx ACPR +/- 11MHz: 30'C ~ +70'C: 30dBc (max.)
- TX on/off control time: 30'C ~ +70'C: 5us (max.)
- Rx Gain Flatness: 25'C: +/- 1dB; -30'C: +/- 2dB; 70'C: +/- 2dB
- Rx Noise Figure: 30'C ~ +70'C: 3.5dBm (max.)
- Rx Third Intercept Point: 30'C ~ +70'C: 30dBm (max.)
- Rx Return Loss: 30'C ~ +70'C: 14dB(min.)
- Rx on/off control timing: 30'C ~ +70'C: 2us (max.)
- Tx Current: 700mA (max.): -30'C ~ +70'C
- Rx Current: 130mA (max.): -30'C ~ +70'C
- Increase your existing N Router, or Mimo compatible AP to new levels of performance
- Bi-directional amplifier for IEEE 802.11B - G and N (Mimo)
- Applied of N or MIMO with up to 300Mbps wireless transfer speeds
- Industrial standard RP-SMA type connector
- Built-in lighting, voltage reverse connect and overload protection unit
- Indoor aluminum enclosure with wall mounting screws
- Package includes:
- 1 x Signal booster
- 2 x Antenna
- 2 x Connection cable
- 1 x Power adapter (AC 100~240V / 145cm-cable)
- 1 x Power cable (2-flat-pin plug / 136cm-cable)

Size Chart
pfdeal
Has been added to the cart!