Spider Controller for Control a Large Number of Servos Style Robots - Red + Black
US$ 44.98
US$ 48.18
: In stock
: 215002
- Model: V12- Quantity: 1- Color: Red + black- Material: Plastic + metal- The Spider robot controllers were designed for robots requiring a large numbers of servos such as humanoid...
Share:
- Model: V12
- Quantity: 1
- Color: Red + black
- Material: Plastic + metal
- The Spider robot controllers were designed for robots requiring a large numbers of servos such as humanoid and hexapod style robots. Using an ATmega1280 CPU this controller is fully compatible with the Arduino Mega(1280) and is capable of driving up to 48 micro servos directly from the PCB. All of the processors 70 I/O pins are terminated as both a female header and a servo compatible 3pin male header.
- Download the Instruction Manual and the principle diagram of the circuit from: http://www.veskys.com/Instrucuction Manual/Spider Controller Instrucuction Manual.zip
- ATmega1280 16MHz CPU
- 128KB flash memory, 8K SRAM and 4K EEPROM
- USB interface and ISP socket
- Built in 3A switch mode power supply
- 70 I/O pins with male and female headers
- Support for up to 48 servos
- 16 x 10bit analog inputs; 15 x 8bit PWM outputs; 1 x I2C; 6 x External interrupt pins; 4 x Serial communication
- Comes with Arduino boot-loader installed
- English Manual/Spec: Yes
- Great for DIY project
- Packing list:
- 1 x Controller board
- 4 x 3cm studs
- 4 x 1.7cm studs
- 12 x Screws
- 4 x Nuts
- Quantity: 1
- Color: Red + black
- Material: Plastic + metal
- The Spider robot controllers were designed for robots requiring a large numbers of servos such as humanoid and hexapod style robots. Using an ATmega1280 CPU this controller is fully compatible with the Arduino Mega(1280) and is capable of driving up to 48 micro servos directly from the PCB. All of the processors 70 I/O pins are terminated as both a female header and a servo compatible 3pin male header.
- Download the Instruction Manual and the principle diagram of the circuit from: http://www.veskys.com/Instrucuction Manual/Spider Controller Instrucuction Manual.zip
- ATmega1280 16MHz CPU
- 128KB flash memory, 8K SRAM and 4K EEPROM
- USB interface and ISP socket
- Built in 3A switch mode power supply
- 70 I/O pins with male and female headers
- Support for up to 48 servos
- 16 x 10bit analog inputs; 15 x 8bit PWM outputs; 1 x I2C; 6 x External interrupt pins; 4 x Serial communication
- Comes with Arduino boot-loader installed
- English Manual/Spec: Yes
- Great for DIY project
- Packing list:
- 1 x Controller board
- 4 x 3cm studs
- 4 x 1.7cm studs
- 12 x Screws
- 4 x Nuts